Product Description:
SDP1000-L05 HVAC Application 0-125Pa Flow And Pressure Sensor
Features:
Sensirion differential pressure and flow sensors adopt the thermal measurement principle. Place the controllable heating element at the center of the pressure stabilizing membrane, and then install the temperature sensor symmetrically at both ends of the upstream and downstream of the heating element along the direction of liquid flow. The liquid flowing through the film causes heat to be transferred to the downstream temperature sensor, generating a temperature difference and thus forming a measurable and precise signal. The pressure-stabilizing glass passivation film is installed onto the silicon chip by etching to integrate the micro-thermal flow sensor.
Compared with traditional piezoresistive film sensors, CMOSens gas flow sensors have more advantages in low-speed flow and differential pressure sensitivity, deviation drift and lag, position sensitivity, shock resistance and temperature fluctuation, and support bidirectional measurement.
The chip contains a temperature sensor whose signal can compensate for any possible temperature influence without the need to install additional calibration sensors. Therefore, Sensirion's technical solutions not only save space but also offer extremely high cost-effectiveness. In addition, a digital processing circuit and a storage unit are integrated on the digital chip for storing correction data. All Sensirion sensors are individually calibrated during the production process to ensure that the signals are always fully calibrated, linearized and temperature-compensated.
The accuracy is 0.1% of the full scale
Analog voltage output for signal amplification: 0 to 4 Vdc
Based on the principle of flow measurement
Calibration and temperature compensation
It is not affected by the installation direction
According to your specific requirements, you can choose different models. The features of each model are shown as follows:
Model: Calibration Range: Accuracy Product Features:
SDP1000-L025 -62 to 62 Pa
Linear: -/+ 0.25" H2O 0.5% FS / 1.5% m.v.
SDP1000-L05 0 to 125 Pa
+ 0.5" H2O 0.2% FS / 1.5% m.v. Linear
SDP1000-L 0 to 500 Pa
+ 2" H2O 0.1% FS / 1.0% m.v. linear
SDP1000-R 0 to 500 Pa
+ 2" H2O 0.2% FS / 1.0% m.v. square root
SDP2000-L 0 to 3500 Pa
+14" H2O 0.1% FS / 1.0% m.v. linear
* FS = full scale or full scale, m.v. = measured value; A greater value is effective.
Application field
Medical application
Heating, ventilation and HVAC applications
Industrial application
Automotive electronics
Specification
Differential pressure
Accuracy: 3% m.v.
Pressure range: ±500Pa
The zero point accuracy is 0.1Pa
Calibrate Air and N₂
General
Power supply voltage: 2.7-5.5V
The average power supply current is 3800μA
The power supply current is 5500μA
Interface I²C
Package dimensions (length x width x height) : 29 x 18 x 27.05mm³
Shenzhen Yijiajie Electronic Technology Co., Ltd. mainly serves OEM manufacturers in the sales of sensor products. In the field of sensing and control products, we provide product sales and technical support services in China for globally renowned manufacturers. We are also currently a professional supplier of sensing and control products in China and Hong Kong. The head office was founded in Hong Kong in 2002. The Shenzhen company is located at the intersection of Shennan Middle Road and Huaqiang North Road in Shenzhen. Meanwhile, the company has a large amount of spot inventory in Shenzhen and Hong Kong and can place orders directly from abroad with prompt delivery. We hope to cooperate with domestic related manufacturers to provide your company with high-quality and satisfactory products and make your products more competitive. We sincerely look forward to cooperating with you.
Specifications:
| Pressure range | ±500Pa |
| zero point accuracy | 0.1Pa |
| Power supply voltage | 2.7-5.5V |
| Average power supply current | 5500μA |
Product Tags:
|
|
YJJ SDP1000-L05 HVAC Application 0-125Pa Flow And Pressure Sensor Images
|
